A Sculptural Bollard with a Recessed Light Chamber
This model takes a different approach from bollard lights that use a clear diffuser or a fully open lighting frame.
The LED area is positioned beneath a solid upper cap and inside a curved vertical recess. This gives the fixture a more enclosed and sculptural appearance while reducing the direct visual exposure of the light source from normal viewing angles. The wood-effect cylindrical body is combined with a dark grey upper housing and curved decorative insert, creating a two-tone design suitable for both natural landscapes and contemporary architecture.
This page presents a sourcing reference rather than a fixed-stock retail product. Final optical, electrical and installation details should be confirmed according to the project.
Why Buyers May Choose This Housing Style
- Less Direct View of the Light Source: The upper cap and recessed lighting area partially shield the LED from direct view. This can make the design more appropriate for pathways, gardens and entrances where the fixture is installed close to pedestrians and visual comfort is an important consideration. The actual glare control and light distribution should still be evaluated through samples or photometric data before a project specification is finalised.
- A Narrower Footprint: With a reference diameter of 114 mm, this model is slimmer than many conventional landscape bollards. The smaller body can be useful beside narrow walkways, planting beds, residential entrances and other areas where the fixture should remain visible without occupying too much landscape space.
- Decorative Detail Without a Large Lamp Head: The curved wood-effect insert continues the lower housing finish into the lighting section. Rather than separating the lamp head and body into two unrelated parts, the design uses the wood pattern as a visible decorative feature. This gives the fixture a more distinctive daytime appearance, even when the light is switched off.
Suitable Project Environments
This model can be considered for:
- Residential garden paths
- Villas and apartment entrances
- Hotel and resort landscaping
- Courtyards and terraces
- Pedestrian routes
- Building perimeter areas
- Commercial landscape entrances
- Parks and planted walkways
It is primarily intended for decorative, orientation and low-level pathway lighting rather than high-output roadway illumination.
Reference Specification
| Model | JXN-LGL-AL03 |
|---|---|
| Rated Power | 10W |
| Input Voltage | 100–277VAC |
| LED Source | Philips LED |
| Luminous Efficacy | 130 lm/W |
| Colour Temperature | 4000K |
| Light Distribution | 150° × 360° |
| Guard Level | IP65 |
| Housing Material | Aluminium |
| Surface Finish | Fine sandblasting and wood-effect paint |
| Product Dimensions | Ø114 × H600 mm |
| Warranty | 5 years |
The stated lifetime refers to the LED source under the relevant operating conditions and is separate from the five-year product warranty.
Project Details Worth Confirming
For this particular design, the most important project decisions are not limited to wattage and colour temperature. Buyers may need to confirm:
- Actual light distribution and required IES data
- Installation orientation
- Fixture spacing
- Wood-effect colour and pattern
- Upper housing colour
- LED and driver configuration
- Surge protection
- Mounting plate and anchor bolts
- Dimming or sensor requirements
- Product labels and installation instructions
- Required testing and certification
A project image, approximate quantity and intended installation environment are usually enough for the initial sourcing discussion.
What to Inspect on This Model
The curved and recessed structure creates several quality points that are specific to this housing. During sample or production checking, attention should be paid to:
- Symmetry of the curved decorative insert
- Alignment between the upper cap and cylindrical body
- Coating quality around recessed edges
- Wood-pattern consistency
- Sealing around the internal light chamber
- Water drainage structure
- Fastener position and finish
- Colour consistency across the production batch
- Stability of the mounting base
These details are more likely to affect the finished appearance than small differences in the catalogue wattage.
From a Reference Image to a Clearer Purchase Specification
JXNUO helps buyers convert a product image or general design preference into a clearer sourcing requirement. For a bollard light such as this one, the work may include:
- Finding suppliers with similar housing designs
- Comparing dimensions and construction
- Confirming the LED, driver and electrical protection
- Checking the wood-effect coating and grey finish
- Reviewing mounting details
- Coordinating samples
- Collecting photometric and test documents
- Confirming labels and packaging
- Following production
- Arranging pre-shipment inspection
The aim is to identify whether two visually similar quotations actually describe the same product quality and project suitability.
Looking for a More Decorative Pathway Light?
Send us the installation environment, expected quantity and any available reference images or drawings. JXNUO can help compare shielded bollard light designs, surface finishes and technical configurations available from Chinese suppliers.
Discuss This Bollard Light Design or View More Outdoor Lighting
Reviews
There are no reviews yet.