Product Overview
This split-type galvanized steel light pole is available in 3m and 4m height options for solar street lights and other outdoor lighting installations.
The sectional structure makes the pole easier to pack, transport, and handle than a comparable one-piece pole, which can be useful for mixed-container shipments, smaller project orders, or locations where long cargo is less convenient.
The pole is made from Q235 steel with hot-dip galvanized surface treatment and uses an anchor-base installation. Actual wall thickness, flange dimensions, pole diameter, and foundation requirements should be confirmed according to the selected lighting fixture, local wind conditions, and project requirements.
What Buyers Usually Need to Confirm
Before quotation or supplier matching, buyers normally need to confirm:
- required pole height: 3m or 4m
- lighting fixture type and approximate fixture weight
- top and bottom diameter requirements
- required wall thickness
- flange size and anchor-bolt spacing
- installation location and local wind conditions
- surface finish or additional coating requirements
- project quantity
- destination market and any applicable project standards
If the final pole specification has not yet been decided, buyers can also provide the lighting fixture, installation location, and project conditions for comparison.
See the Light Pole in Production and Inspection
These two videos show the product from two practical stages: the light pole production process and a pre-shipment inspection carried out before delivery. They provide a closer look at structure, surface treatment, workmanship, and the type of checks that may be relevant for project orders.
Related Lighting Options
If the pole will be supplied together with solar lighting fixtures, you may also compare:
- our High Output All-in-One Solar Street Light 60W / 120W / 180W for road, parking-area, and project lighting
- our 3CCT All-in-One Solar Street Light 12W / 20W for smaller roads and projects requiring adjustable color temperature
Related Inspection Reference
Pole quality is not only about steel thickness. Coating preparation, internal corrosion protection, flange welding, packaging, and transport protection can also affect long-term project performance.
See our inspection article: Street Light Poles Rarely Fail on Day One — Problems Start After Installation.
Typical Specifications
The specifications below are provided as a typical reference for this pole type. Final dimensions and structural requirements should be confirmed according to the selected lighting fixture, installation conditions, and project requirements.
| Type | Split-type |
| Height | 3m / 4m |
| Material | Q235 steel |
| Surface Treatment | Hot-dip galvanized |
| Thickness | 1.5 mm |
| Diameter | Top 76 mm |
| Bottom 114 mm | |
| Flange Size | 250 × 250 × 8 mm |
| Anchor Bolt Hole Spacing | 200 × 200 mm |
| Installation | Anchor-base installation |
| Standard Accessories | Fastener kit / installation instructions |
Note: Pole thickness, flange dimensions, anchoring arrangement, and foundation design should be verified against fixture weight, wind conditions, and local project requirements before final order confirmation.
Send Us Your Requirements
Send us your required pole height, lighting fixture, project quantity, installation location, and any structural or surface-treatment requirements. We can compare suitable pole configurations and sourcing options based on the actual project conditions.
